Skip to main content
Speclore

Water Discharge Hose

Reference data and engineering information about water discharge hose for miscellaneous applications.

waterdischargehose

Overview

Engineering reference data for Water Discharge Hose in miscellaneous.

Key Formulas

Unit Conversion

y=x⋅ky = x \cdot k

Multiply by conversion factor.

Linear Interpolation

y=y1+(x−x1)(y2−y1)x2−x1y = y_1 + \frac{(x - x_1)(y_2 - y_1)}{x_2 - x_1}

Estimate between two known points.

Percentage

p=partwhole×100%p = \frac{\text{part}}{\text{whole}} \times 100\%

Part as fraction of whole.

Variables

Symbol Description Unit
xx Input value —
yy Output value —
kk Conversion factor —

Hose Internal Diameter Reference

The table below shows the standard relationship between hose nominal diameter and actual internal diameter.

Unit Conversions for Water Discharge

The following common unit conversions are used for water discharge calculations involving hoses:

  • Pressure: 1 psi=6.9 kPa=0.069 bar1 \, \text{psi} = 6.9 \, \text{kPa} = 0.069 \, \text{bar}
  • Length: 1 ft=0.3048 m1 \, \text{ft} = 0.3048 \, \text{m}
  • Flow Rate: 1 gal (US)/min=6.30888×10−5 m3/s=0.227 m3/h1 \, \text{gal (US)/min} = 6.30888 \times 10^{-5} \, \text{m}^3/\text{s} = 0.227 \, \text{m}^3/\text{h}

Interactive Charts

References